CORSL - SWITCH4T

SWITCH4T

DALI2 Multi Control Device

● DALI-2 switch input modules can be added to convert normal 'push-to-make' switches to DALI-2 switches.

● Can work in 'input device' or 'application controller' mode.

● Multi-master capable: Several modules can be installed within a DALI circuit.

● Different DALI commands can be assigned to each input.

● In addition to the standard DALI commands, the application controller also supports DALI DT8 TC control.

● short button press, long button press (with repetition for dimming) and 'toggle' are supported.

● Easy installation: the device can be installed in a flush-mounted installation box and is supplied via the DALI bus.

● Easy configuration via CORSL DALI USB interface and DALI-Config Software Tool.

Specifications

Electrical Data
Supply	via DALI signal line
typ. current consumption DALI (at 16.5V)	2 mA
Max. current consumption DALI (Inrush current at 22.5 V)	8 mA
DALI-2 addresses	1
Technical Data
Input type	potential free button / switch
Number of inputs	4
Marking input terminals	T1, T2, T3, T4, COM
Minimum length of control pulse	200ms
Control pulse length for long press	configurable: 200-5100ms
Max wire length	50cm
Environmental Conditions
Storing and transportation temperature	-20°C ... +75°C
Operational ambient temperature	-20°C ... +75°C
rel. humidity, none condensing	15% ... 90%
General Data
Protection class	II in intended use
Protection degree housing	IP40
Protection degree terminals	IP20
Mounting	back box installation, installation in protection class II devices

Terminals
Connection type	spring terminal connectors
Wire size solid core	0,25 ... 0,65 mm² (23 … 19AWG)
Wire size fine wired	0,25 ... 0,65 mm² (23 … 19AWG)
Wire size using wire end ferrule	0,2 ... 0,5 mm²
Stripping length	8~9 mm
Standards
DALI	IEC62386-101, IEC62386-102, IEC62386-103, IEC62386-301
EMC	EN IEC 61547, EN IEC 55015
ROHS	IEC 62321
Markings	DALI-2